GRID Accessories — Endpoints & Touch Panels

GRID Networking Accessories & Endpoints — Consolidation, Keystones, Patch Panels & Touch Panels

GRID Networking accessories & endpoints finish a POE-Jack® design: dropped-ceiling consolidation boxes, IP/PoE over coax & 2-wire extenders, LED-trace keystone jacks, 24-port patch panels, keystone wall plates, surface boxes and 10″ PoE Android touch panels.

If you’re looking for GRID networking accessories, a PoE / IP-over-coax extender, or keystone jacks, patch panels and wall plates for PoE in Canada, this collection groups the ecosystem in one place for integrators, IT teams and advanced DIY.

  • Ceiling consolidation: Use POEJK-CPE1 to create serviceable zones instead of stuffing everything into the rack.
  • IP-over-coax retrofit: POEJK-2WIRE carries Ethernet and PoE over existing 2-wire or coax runs for retrofit projects.
  • Port-trace & patching: LED keystones, loaded/unloaded patch panels, wall plates, surface boxes and blank inserts keep racks and walls clean and traceable.
  • PoE endpoints: 10″ PoE Android touch panels provide always-on dashboards, booking and control screens on one PoE cable.

Best uses in Canada

  • Ceiling consolidation & zone cabling: Use POEJK-CPE1 to create tidy consolidation points in open offices, classrooms and clinics, feeding multiple POE-Jack® plates and access points from a single ceiling box.
  • Retrofit over legacy coax or 2-wire: Use POEJK-2WIRE when you need to move cameras or IP devices onto Ethernet/PoE but existing coax or alarm pairs are already in the walls.
  • Clean racks and patch fields: Combine POEJKPP6-24, POEJKPP6-24U, JK6 keystones and JKB blanks for organized, fully populated patch panels.
  • Media walls and AV plates: Use JKWP2/JKWP4 wall plates, decorator straps and SMK2 surface boxes to build media walls, TV locations and conference-room terminations that look finished and are easy to label.
  • Room booking & dashboards: Mount TOUCH10 PoE touch panels in lobbies, meeting rooms and operations centers for always-on status without separate power supplies.
  • Cold mechanical rooms & service spaces: Use LED keystones and the LEDT tester to trace ports quickly in noisy, cold mechanical rooms and telecom closets where guessing is costly.

FAQs

Do these GRID accessories work with any PoE switch?

Yes. They’re built around standards-based structured cabling and 802.3af/at/bt PoE. Use a PoE or PoE++ switch sized for your total power budget and distances; GRID PoE switches are a natural fit, but these accessories also work with compatible third-party PoE gear.

Can I mix GRID patch panels, keystones and wall plates with existing cabling?

In most cases, yes. The patch panels, keystone jacks and wall plates follow common Cat6/Cat6A form factors, so they integrate with typical structured cabling designs. For best PoE performance, pair them with quality copper cabling and follow your site’s termination and testing standards.

When should I use IP-over-coax (POEJK-2WIRE) instead of pulling new cable?

Choose IP-over-coax/2-wire when conduit is full, walls cannot be opened, or budget is tight but the existing coax or copper pair is still in good condition. New 23-AWG cabling is preferred for greenfield work; 2WIRE is ideal for brownfield retrofits.

Are these accessories only for GRID / POE-Jack® projects?

No. While they’re designed to complement POE-Jack® and GRID PoE switches, most items (keystones, wall plates, blanks, patch panels and tools) can also support conventional structured cabling and non-GRID networks.

How do I label and service zones built with CPE1 and LED keystones?

Treat each CPE1 as a zone hub: document which desks or rooms it serves, label panel ports to match jack locations and use LED keystones plus the LEDT tester to trace suspicious links without guesswork or tone probes.

Filter products
The highest price is $1,562.99
$
$
Clear all

22 Products