Grid 240W 48VDC Industrial DIN-Rail Power Supply | For PoE Switches & Active POE-Jack® Systems | POEJK-PS48-240
Couldn't load pickup availability
Love this product? Share the transformation and inspire others to upgrade their homes or businesses too!
240W 48VDC Industrial DIN-Rail Power Supply for GRID PoE Switches
The POEJK-PS48-240 is a 240W, 48VDC industrial DIN-rail power supply designed to feed GRID PoE switches and Active POE-Jack® systems. It’s the recommended DC source for industrial switches such as the POEJK-S4SFP-120, POEJK-S4-120 and POEJK-S8-240, turning a small electrical panel or rack enclosure into a reliable 48V DC microgrid node.
Mount it on DIN-rail alongside your switches to keep AC terminations inside the panel and deliver clean, regulated 48VDC to the PoE plant.
Key features
- 240W 48VDC output – sized to power GRID industrial PoE switches and small clusters of Active POE-Jack® zones.
- Industrial DIN-rail form factor – snaps onto standard DIN rail in electrical and low-voltage panels.
- Designed for GRID PoE switches – referenced as a companion supply for POEJK-S4SFP-120, POEJK-S4-120 and POEJK-S8-240.
- Dedicated 48VDC bus – supports DC microgrid topologies where PoE switches share a centralized 48VDC source.
- Industrial construction – intended for control panels, IDFs and mechanical spaces rather than loose desktop use.
Technical highlights
| Parameter | Value |
|---|---|
| Model | POEJK-PS48-240 |
| Output power | 240W (48VDC) |
| Output voltage | 48VDC (nominal) |
| Form factor | Industrial DIN-rail power supply |
| Typical loads | GRID industrial PoE switches (e.g., POEJK-S4SFP-120, POEJK-S4-120, POEJK-S8-240) and Active POE-Jack® systems |
| Accessory | POEJK-PSCORD power cord (for POEJK-PS48-240) |
Ideal applications
- Powering a small DC microgrid panel with one or more GRID industrial PoE switches.
- Providing dedicated 48VDC for Active POE-Jack® in-wall switch zones via PoE switches.
- Industrial and light-commercial enclosures where DIN-rail mounting is preferred over rackmount PSUs.
Compatibility & ecosystem
Use the POEJK-PS48-240 as the DC source for GRID industrial switches, especially where you need a DIN-rail power supply instead of a rackmount AC PSU. It fits naturally into GRID DC microgrid designs alongside Active POE-Jack®, PoE switches and bulk cabling such as POEJC6E-CMP and POEJC6A-CMP.
Install & design notes
- Mount on DIN rail in an appropriate electrical or low-voltage panel.
- Size the 240W budget against the PoE load of the connected switches and any other 48VDC devices.
- Pair with the POEJK-PSCORD where a specific power cord is required.
- Refer to the latest GRID documentation for input voltage requirements and wiring diagrams.
Canada-ready checklist
- ✓ Suitable for Canadian commercial, institutional and industrial control panels using 48VDC PoE.
- ✓ Works with GRID PoE switches commonly deployed in Canadian smart buildings and low-voltage retrofits.
Specifications are subject to change without notice. Always confirm final details with the latest GRID documentation before design or tender.