Dimmers, Switches & Lighting Controls – Canada

Dimmers, Switches & Lighting Controls Canada — exact-fit routing for dimmers, smart switches, sensors, fan controls, wallplates, outlets, hubs, remotes, and smart-home controls

Dimmers, Switches & Lighting Controls Canada is the parent decision hub for Canadian buyers choosing lighting controls, wall devices, smart-home controls, receptacles, wallplates, remotes, modules, kits, and accessories. Start here when the buyer has not yet narrowed the project to a dimmer, switch, sensor, fan control, receptacle, USB outlet, wallplate, smart hub, Pico remote, Z-Wave control, Swidget module, or fixture/load-specific control path.

This collection is intentionally broad. Its smart rules include product types such as dimmers, switches, fan controls, remote controls, keypads, wall plates, receptacles/outlets, control modules, smart plugs, kits, mounting hardware, sensors, and wall devices. Use this page as the top-level router, then move into the narrower collection that matches the actual load, wiring condition, smart-home system, finish family, and device function.

Verify before ordering: Lighting controls are selected by load type, fixture or driver compatibility, dimming method, neutral availability, voltage, fan motor/load requirements, occupancy or vacancy workflow, hub requirements, multi-location wiring, companion/accessory support, wallbox depth, wallplate opening, receptacle/outlet function, finish family, and manufacturer documentation. Confirm the exact product page before treating any dimmer, switch, sensor, fan control, remote, hub, receptacle, wallplate, module, kit, or accessory as interchangeable.

Start here: choose the right control path

Use this table to route broad control intent into the correct collection before comparing variants, finishes, load ratings, wiring, accessories, smart-home systems, and installation requirements. This is a decision aid, not a compatibility guarantee.

Buyer need	Start here	Also compare	Why to review it
General dimmer switch shopping	Dimmer Switches Canada	Lutron Dimmers · Lutron LED Dimmers · Lutron ELV Dimmers	Use when the buyer knows they need dimming but has not yet chosen smart vs non-smart, LED+, ELV, MLV, 0-10V, or phase-selectable control.
Lutron dimmer family selection	Lutron Dimmers	DVRF-6L Caséta Diva · DVCL-153P Diva LED+ · MA-PRO Maestro PRO	Use when the buyer wants Lutron dimming but still needs to choose Caséta, Diva, Maestro, Sunnata, LED+, ELV, MLV, or 0-10V paths.
Caséta smart lighting ecosystem	Lutron Caséta	DVRF-6L Smart Dimmer · DVRF-5NS Smart Switch · Smart Hubs · Pico Remotes	Use when app control, scenes, schedules, Pico remotes, hub-supported workflows, or Caséta system planning are part of the project.
Smart on/off switching instead of dimming	Lutron Smart Switches	DVRF-5NS Claro Smart Switch · PD-6ANS Original Smart Switch · Smart Switches & Outlets	Use when the load should switch on/off rather than dim, or when dimming compatibility is not the requirement.
Style-family routing: Diva, Claro, Maestro, Sunnata	Lutron Diva & Claro	Lutron Maestro · Lutron Wallplates · Lutron Receptacles	Use when the buyer is standardizing a room around device appearance, finish family, wallplates, receptacles, and matching controls.
Multi-location, companion, and extra control points	Lutron Companions	DVRF-AS Accessory Switch · Lutron Pico Remotes · Pico Paddle Remote	Use when the project needs added control points, companion devices, accessory switches, or wireless Pico alternatives.
Hubs, bridges, repeaters, and starter kits	Lutron Smart Hubs	L-BDG2 Smart Hub · L-BDGPRO2 Smart Hub PRO · Starter Kits	Use when the project needs a system component, bridge, PRO hub, repeater, kit, or bundled starting path rather than only a wall control.
Motion, occupancy, vacancy, or sensor automation	Lighting Sensors Canada	Lutron Motion Sensors · MSCL-OP153M Sensor Dimmer · PD-OSENS Wireless Sensor	Use when the buyer needs occupancy, vacancy, motion, wireless sensing, sensor dimming, or automated room-control behaviour.
Fan-speed, fan/light, timer, or humidity control	Lutron Fan Controls	PD-FSQN Caséta Fan Control · MA-T51MN Countdown Timer · MS-HS3 Humidity Sensor	Use when the controlled load is a fan, fan/light combination, bathroom fan, timed shutoff path, or humidity-control workflow rather than standard light dimming.
Digital/electronic switching or timer-adjacent route	Lutron Digital Switches & Timers	ST-6ANS Electronic Switch · MA-S8AM Electronic Switch · MA-T51MNB Timer Path	Use when the buyer is choosing electronic on/off switching, countdown timer escape routes, or bathroom-control adjacent paths.
Wallplates and finish matching	Lutron Wallplates	SC-1 Claro 1-Gang · SC-2 Claro 2-Gang · Diva & Claro	Use after the device type is known and the buyer needs gang count, decorator opening, wallplate finish, blank insert, or Pico mounting support.
Receptacles, outlets, GFCI, and USB charging	Lutron Receptacles	USB-C PD Wall Outlets · SCR-15 Receptacle · CAR-15-CCTR USB-C PD	Use when the project is about outlet function, TR, GFCI, USB charging, dimming receptacles, or finish-matched receptacles rather than light control.
Enbrighten / Z-Wave controls and smart outlets	Enbrighten	Enbrighten 24770 Motion Sensing Smart Switch · Enbrighten 26932 Motion Sensing Smart Dimmer · Smart Switches & Outlets	Use when the smart-home path is Enbrighten or Z-Wave rather than Lutron Caséta, Maestro, or Diva/Claro.
Swidget modular outlet, insert, and sensor path	Swidget	Swidget 15A Outlet · Swidget Motion Module · Swidget IAQ Module	Use when the buyer is comparing modular outlets, inserts, sensors, and smart-home modules instead of a conventional switch or dimmer.
Fixture/load selection before control selection	Pot Lights Canada	Lotus LED Lights · LED Drivers · LED Tape Light	Use fixture and driver collections first when the light, fan, driver, tape system, or controlled load has not yet been selected.

Important product-type boundary

This parent collection is intentionally broad and can include primary controls, secondary controls, accessories, wall devices, receptacles, hubs, remotes, modules, kits, mounting hardware, sensors, smart plugs, and wallplates. Check the product type before ordering so you do not substitute a wallplate, receptacle, Pico remote, accessory switch, hub, bridge, module, kit, companion, sensor, or mounting accessory for the primary control that actually manages the load.

Controls are not interchangeable across every fixture, fan, driver, outlet, or wiring condition. Choose the controlled load first, then select the matching control family, wiring path, accessory path, and finish family.

Shop controls by intent

Dimming: start with Dimmer Switches Canada, then narrow into Lutron Dimmers, LED Dimmers, ELV Dimmers, MLV Dimmers, or 0-10V Dimmers.
Smart lighting: start with Lutron Caséta, Lutron Smart Switches, Smart Hubs, and Pico Remotes.
Manual and designer controls: compare Diva & Claro, Maestro, Wallplates, and finish-matched receptacle paths.
Sensing and automation: start with Lighting Sensors Canada, then narrow to Lutron Motion Sensors or specific sensor-dimmer products.
Fan and bathroom-control loads: use Lutron Fan Controls, Lutron Digital Switches & Timers, humidity sensor paths, and bathroom fan routes instead of substituting a standard light dimmer.
Wall devices and charging: use Wallplates, Receptacles, and USB-C PD Wall Outlets when the buyer is choosing the wall-device package rather than the lighting-control device.
Alternative smart ecosystems: compare Enbrighten, Swidget, and Smart Home Controls when the project is not Lutron-first.

Pair controls with the right load, fixture, or device family

Pot Lights Canada — choose fixture family before control when the light has not been selected.
Lotus LED Lights Canada — Lotus fixture, driver, trim, and exact-SKU paths.
Reno Lighting — Reno lighting fixture paths.
LED Drivers and Power Supplies — verify driver, voltage, and dimming method before choosing controls.
LED Tape Light Canada — low-voltage tape and driver systems need system-level control verification.
LED Panels & Troffers and Commercial LED Lighting — use where 0-10V, sensor, commercial-voltage, or project-grade control decisions are tied to the fixture family.
Bathroom Fans — choose the fan unit before finalizing timer, humidity, switch, or fan-control products.

Exact-fit control selection checklist

Load: LED fixture, ELV load, MLV load, 0-10V driver, low-voltage tape, fan motor, receptacle, USB outlet, plug-in lamp, or sensor-controlled zone.
Function: dimming, on/off switching, smart control, fan speed, timed shutoff, occupancy/vacancy sensing, humidity response, USB charging, outlet function, or wall finishing.
Wiring: neutral availability, single-pole, 3-way, 4-way, multi-location, companion/accessory support, 0-10V control wiring, wallbox depth, and device space.
System: Caséta, Maestro, Diva/Claro, Sunnata, Enbrighten/Z-Wave, Swidget, standalone control, hub/bridge requirement, Pico remote, or app-supported workflow.
Finish: gloss, Satin Colors, designer finish, wallplate gang count, decorator opening, receptacle finish, USB outlet finish, and room-by-room standardization.

When this broad controls hub is not the right final page

Use a fixture collection first when the buyer has not selected the pot light, Lotus fixture, driver, tape light, panel, troffer, or fan load.
Use a child control collection when the buyer already knows the function: dimmer, smart switch, fan control, sensor, wallplate, receptacle, USB outlet, Pico remote, hub, or kit.
Use product pages when the buyer is comparing exact SKUs such as DVRF-6L, DVRF-5NS, L-BDGPRO2, PD-OSENS, MACL-153M, SC-1, SCRS-15-TR, or CAR-15-CCTR.
Use project/trade routes when the buyer is building a multi-room, multi-family, contractor, or specification-driven control schedule.

What to confirm before ordering dimmers, switches, or controls

Whether the product is a primary control, secondary control, accessory, hub, remote, module, sensor, wallplate, receptacle, USB outlet, kit, or mounting part.
Load type, fixture type, driver type, fan motor/load type, outlet function, and whether dimming, switching, sensing, fan control, or charging is required.
Wiring condition: neutral, single-pole, 3-way, 4-way, multi-location, 0-10V, companion/accessory support, wallbox depth, and retrofit constraints.
Smart-home requirements: hub, bridge, app control, Pico, Z-Wave, Swidget module, Caséta system, or standalone local control.
Finish family, wallplate gang count, receptacle type, USB connector type, and room-by-room device standardization.
Exact product documentation and manufacturer compatibility guidance before installation.

Trade, project, and dealer support

Trade Program — apply for approved trade access and repeat-ordering support.
Project Pricing — request quoting support for larger jobs, multi-room upgrades, specification-driven orders, and mixed-category product lists.
Dealer Access — explore dealer access for control-focused pros and recurring business.

Dimmers, switches, and lighting controls FAQ

Where should I start if I only know I need a dimmer?

Start with Dimmer Switches Canada, then narrow by smart vs non-smart, Lutron family, load type, wiring condition, and dimming method.

Where should I start if I only know I want Lutron?

Start with the Lutron Smart Lighting Controls hub, then narrow to Caséta, dimmers, smart switches, Pico remotes, sensors, hubs, wallplates, receptacles, USB-C outlets, fan controls, or kits.

What is the difference between a switch and a dimmer?

A switch controls on/off operation. A dimmer adjusts brightness for compatible dimmable loads. Choose the fixture or load first, then verify the correct control type.

Are sensors, Pico remotes, hubs, and companion switches primary controls?

Not always. Some are accessory, system, or secondary-control paths. Confirm the selected system, primary device, wiring instructions, and pairing requirements before ordering.

Can I use a light dimmer for a fan?

Do not treat fan loads and light dimming as interchangeable. Use the fan-control path and verify the selected product documentation for the exact fan application.

Should I choose the control or the light fixture first?

Choose the fixture, driver, fan, tape system, or controlled load first when compatibility is unknown. Then select the dimmer, switch, sensor, or control that the manufacturer documentation supports.

Quick category guide

What this category is for

Dimmers, Switches & Lighting Controls Canada — exact-fit routing for dimmers, smart switches, sensors, fan controls, wallplates, outlets, hubs, remotes, and smart-home contr...