Swidget Modular Outlets & Sensors — Canadian Spec & Install Guide

Swidget Modular Outlets & Sensors — Canadian Spec & Install Guide

Swidget Modular Outlets & Sensors — Canadian Spec & Install Guide

Swidget modular receptacles, switches, and sensor inserts installed in a Canadian home
Swidget — modular receptacles, switches, and inserts for Canadian retrofits and new builds.

Answer Card

  • Modular receptacles, switches, timers + snap-in inserts (control/sensing)
  • Use: occupancy, bathroom/ERV fans, IAQ (VOC/Temp/RH), power monitoring
  • Power: line-voltage devices; inserts are low-power modules (confirm per SKU)
  • Certifications: cETLus/CSA (confirm per model); indoor/damp per spec
  • Install: licensed electrician for line-voltage; confirm neutral & box depth
  • Buy in Canada from Simply Secured; Dealers: apply at SimplyControlled.ca

Authority Hook (Canada, cETLus/CSA context)

Swidget combines standard Canadian wiring devices (receptacles, switches, timers) with snap-in inserts that add control and sensing. Certification and environmental ratings vary by SKU; verify cETLus/CSA marks and any indoor/damp suitability on each spec sheet. Some devices provide Class 2 power to the insert cavity—confirm on the spec sheet.

Why / Value

Choose Swidget when you need retrofit-friendly sensing and control without replacing entire systems. It pairs well with IAQ-driven ventilation such as Panasonic ventilation to automate bathroom or whole-home airflow using humidity/VOC triggers.

Series / Map

  • Devices (examples): 15A/20A outlets (e.g., R1015SWA, R1020SWA), On-Off switch (S16001WA), 20/40/60 dry-contact timer (S16008WA), auxiliary control (S16009WA), dimmer (SD3001WA) — confirm electrical ratings, neutral requirement, and box depth.
  • Inserts (examples): Wi-Fi control (WI000UWA), Wi-Fi + USB (WI001UWA), Wi-Fi + Guidelight (WI002UWA), Wi-Fi + Power-Out (WI003UWA), Wi-Fi + Motion (WI004UWA), Wi-Fi + Temp/Humidity (WI005UWA), Wi-Fi + HD Camera (WI007UWA), Wi-Fi + IAQ (VOC/Temp/RH) (WI008UWA) — confirm protocol support and integrations per insert.
  • Ecosystem: Swidget app control; voice assistant or hub integrations vary by insert — confirm on spec sheet.

Note: Where details are not listed, treat as unknown and confirm on spec sheet.

Key Specs

Category Summary (confirm per SKU)
Voltage / Driver Line-voltage devices (e.g., 120 VAC class); inserts powered by the base (low-voltage module).
Control / Protocol Wi-Fi or Z-Wave per insert; app/hub/voice integrations vary by model.
Ingress / Location Indoor by default; some models suitable for damp locations — verify per spec.
Listings cETLus/CSA where applicable; retain documentation for inspection.
Construction Decorator-style devices and modular inserts; verify cubic-inch capacity and conductor count.

Use Cases & Pairings

Ventilation & IAQ: Humidity or IAQ inserts can automate fans or ERV/HRV calls with Panasonic ventilation (confirm wiring method and control type).

Lighting & scenes: Occupancy/motion inserts can trigger lighting scenes alongside smart controls like Caséta by Lutron (verify compatibility and load type).

Design & Install Tips

  • Neutral & depth: Many smart devices need a neutral and extra box volume; check conductor count and box fill.
  • Dry-contact vs line-voltage: For fans/ERVs, confirm whether the switch/timer uses dry contacts or switched line.
  • Network planning: Choose Wi-Fi vs Z-Wave to match your network and integration goals.
  • Ontario ESA note: Keep certification labels/spec sheets available for inspection and follow provincial/municipal codes.

For broader automation (e.g., water shutoff or HVAC calls), consider EcoNet Controls where appropriate.

Pricing & Scopes

Scope by device count (receptacles/switches/timers) plus required inserts. Add allowances for plates, hubs (if required), commissioning, and documentation for ESA inspection in Ontario. Prices vary by model and finish—see product pages below for current CAD pricing.

Featured Snippet Checklist

  • What is Swidget? A modular platform of receptacles/switches with snap-in inserts (control/sensors).
  • Where to use? Canadian residential and light commercial indoor spaces; check damp suitability.
  • How to wire? Treat as standard line-voltage device; verify neutral and box fill; follow the spec sheet.
  • How to automate? Choose inserts (Wi-Fi, motion, IAQ) and configure app/hub rules; test fail-safe behaviour.
  • Compliance? Look for cETLus/CSA; retain labels for ESA (Ontario).

FAQs

Do Swidget devices need a neutral?

Many smart switches/receptacles require a neutral and adequate box space. Confirm per SKU on the spec sheet.

Can Swidget automate a bathroom fan or ERV/HRV?

Yes—use the dry-contact timer or auxiliary control with the appropriate insert. Confirm wiring type and compatibility on the spec sheet.

Which protocol should I choose—Wi-Fi or Z-Wave?

Match your network and integration goals. Wi-Fi is app/voice-friendly; Z-Wave is hub-centric. Confirm features per insert model.

Are these certified for use in Canada?

Look for cETLus/CSA on the device and documentation. Damp/temperature ratings vary by model—confirm on the spec sheet.

How do I become a dealer in Canada?

Apply at our B2B portal: SimplyControlled.ca. Canadian distributors and contractors welcome.

Author & Review

Author: Simply Secured Technical Team

Reviewed by: Reviewer Name, CET (Certified Engineering Technologist)

Last reviewed: 2025-11-07

Compliance Footnote

Confirm cETLus/CSA certification, indoor/damp suitability, and any IP ratings per model. For Ontario projects, retain documentation for ESA inspections. Where control voltages or third-party interfaces are used, verify compatibility and follow provincial codes.

Trade & Dealer Pricing (Canada)

Canadian distributors and contractors: get inventory, quotes, and project pricing at SimplyControlled.ca.