Overview

The Panasonic Intelli-Balance™ 100 FV-10VE2 is a compact, 50–100 CFM energy recovery ventilator (ERV) designed for Canadian homes in temperate climate zones. Instead of relying on exhaust-only bath fans that create negative pressure and pull in cold drafts, this ERV supplies tempered, filtered outdoor air while exhausting stale indoor air to help balance pressure and improve comfort.

Within Panasonic’s Canadian ERV lineup, the Intelli-Balance 100 family (FV-10VEC2 / FV-10VEC2R / FV-10VE2) is the go-to for condos, secondary suites and smaller homes. The FV-10VE2 is the temperate-climate, corded version: same SmartFlow™ DC motors and 30–100 CFM adjustability, but tuned for regions where winter design temps are cold, not extreme. For harsher “any climate” conditions, Simply Secured also stocks Intelli-Balance 100 Any Climate models FV-10VEC2 and FV-10VEC2R.

Key Features & Benefits

• Customizable 30–100 CFM airflow – Built-in multi-speed selectors let you set supply and exhaust from roughly 30 up to 100 CFM, so you can match Canadian design airflow instead of being locked into one speed. :contentReference[oaicite:3]{index=3}
• Occupant-controllable Boost function – A dedicated boost input bumps the ERV to high speed (100 CFM) when activated, ideal after showers, cooking or gatherings when you want a quick flush of stale air. :contentReference[oaicite:4]{index=4}
• Two DC Smart Flow™ motors – Dual brushless DC motors automatically ramp up when static pressure increases, helping maintain chosen CFM even with longer duct runs or future filter loading. :contentReference[oaicite:5]{index=5}
• Temperate-climate ERV core – Panasonic’s capillary ERV core transfers both heat and moisture between exhaust and supply streams, helping avoid over-drying in the winter shoulder season and reducing humidity swings in milder Canadian climates. :contentReference[oaicite:6]{index=6}
• Frost protection for down to −10 °C – When outdoor temperatures drop below about −10 °C, the outside damper closes and the unit goes into standby to protect the core, making FV-10VE2 best suited for temperate regions that don’t see sustained deep freezes. :contentReference[oaicite:7]{index=7}
• MERV 8 filter included (MERV 13 optional) – Intelli-Balance 100 ships with a MERV 8 filter that can be upgraded to the OEM Intelli-Balance 100 MERV 13 filter for finer particle capture without sacrificing airflow. :contentReference[oaicite:8]{index=8}
• Four dual-size duct adaptors – Integrated 4"/6" round adaptors (two for exhaust, two for supply) make it easy to use 4" runs to grilles and 6" trunks where needed, simplifying design in tight mechanical spaces. :contentReference[oaicite:9]{index=9}
• Ceiling or wall mount, plug-in power – A 120 V cord and multi-position mounting bracket let you hang the unit in a mechanical room, closet or bulkhead without tying into a furnace or condensate drain line. :contentReference[oaicite:10]{index=10}
• ASHRAE 62.2 timing function – The built-in minutes-per-hour timer lets you set how many minutes each hour the ERV should run, supporting code-compliant continuous ventilation strategies. :contentReference[oaicite:11]{index=11}
• Quiet, continuous operation – DC motors and insulated housing keep sound levels low so the unit can run continuously in condos, suites and smaller homes without becoming a noise complaint. :contentReference[oaicite:12]{index=12}

Canadian Use Cases

• Secondary suites and basement apartments where you need balanced fresh air without tying into an existing furnace.
• Smaller detached homes and townhomes in temperate Canadian regions that land in the 50–100 CFM design range.
• Condos or laneway houses where mechanical closets are tight and a compact, ceiling-/wall-mounted ERV is needed.
• Homes served by ductless heat pumps or mini-splits that still need code-compliant fresh air and humidity control.
• Energy retrofits where new windows and air sealing have created stuffy bedrooms, foggy glass and lingering odours.

Need help choosing a Panasonic ERV?

If you are not sure whether this model is the right size or configuration for your project, check out our Best Panasonic ERV Systems in Canada (2025) guide for model comparisons and Canadian sizing examples.

Technical Details

• Model: Panasonic Intelli-Balance™ 100 Temperate Climate ERV – FV-10VE2 (corded)
• Airflow range: Adjustable supply and exhaust from approximately 30–100 CFM with discrete settings (50/60/70/80/90/100 CFM) via built-in selectors. :contentReference[oaicite:13]{index=13}
• Rated CFM: 100 net CFM supply and 100 net CFM exhaust at both 0.1" and 0.4" w.g. static pressure, tested per HVI 915/916 and CSA-C439. :contentReference[oaicite:14]{index=14}
• Voltage & power: 120 V, 60 Hz; power consumption approximately 62 W at 0.1" SP and 80–81 W at 0.4" SP. :contentReference[oaicite:15]{index=15}
• Motors: Two totally enclosed DC brushless motors with Smart Flow™ technology, rated for continuous run and equipped with thermal cutoff fuses. :contentReference[oaicite:16]{index=16}
• Duct connections: Four round duct adaptors supporting 4" or 6" ducts (two exhaust, two supply). :contentReference[oaicite:17]{index=17}
• Housing & construction: 22 ga galvanized steel housing suitable for ceiling or wall mounting indoors.
• Approximate dimensions (housing): 28-1/2" L × 23" W × 8-7/8" H.
• Climate rating: Temperate climate ERV; recommended for areas where outdoor temperatures do not often fall below −10 °C (14 °F). Below this, the outdoor damper closes and the unit enters standby to protect the core. :contentReference[oaicite:20]{index=20}
• ERV core: Capillary, moisture-transferring ERV core with anti-mold treatment, providing sensible and latent heat recovery for balanced humidity. :contentReference[oaicite:21]{index=21}
• Filtration: Factory MERV 8 filter included; Intelli-Balance 100 OEM replacements are FV-FL0810VE1 MERV 8 and FV-FL1310VE1 MERV 13. :contentReference[oaicite:22]{index=22}
• Controls: Onboard multi-speed selectors and adjustable minutes-per-hour (ASHRAE 62.2) timer; low-voltage boost input allows hi/lo control from a wall switch, timer or automation relay. :contentReference[oaicite:23]{index=23}
• Certifications & standards: Airflow tested per HVI 915/916; energy performance per CSA-C439. ENERGY STAR® certification is not listed for FV-10VE2. :contentReference[oaicite:24]{index=24}
• Warranty: 6 years on DC motors; 3 years on all other parts (Panasonic limited warranty). :contentReference[oaicite:25]{index=25}

What’s Included

• Panasonic Intelli-Balance™ 100 FV-10VE2 ERV (temperate climate, corded)
• Factory-installed MERV 8 filter for Intelli-Balance 100
• Integrated 4"/6" duct adaptors on all four ports
• Ceiling/wall mounting bracket hardware
• Power cord and internal junction box (for cord routing / strain relief)
• Installation and homeowner documentation from Panasonic

Common Questions

Q: How well does this ERV handle Canadian winters?

A: FV-10VE2 is a temperate-climate Intelli-Balance 100 model. It’s ideal where outdoor temperatures occasionally dip below −10 °C but don’t stay there for long. When it gets very cold, the outdoor damper closes and the unit goes into standby to protect the core. If your project regularly sees deep cold snaps (−20 °C and below), consider the any-climate Intelli-Balance 100 models FV-10VEC2 or FV-10VEC2R, or a BalancedHome Elite Plus+ system, for more robust cold-climate defrost strategies.

Q: Can I use this ERV with a heat pump or mini-split system?

A: Yes. Intelli-Balance 100 is often paired with ductless heat pumps or mini-splits so that the ERV handles fresh air and humidity while the heat pump manages heating and cooling. The ERV’s low, continuous airflow helps keep indoor air fresher than simply recirculating air with a heat pump alone.

Q: How often should I change the filters?

A: Panasonic recommends inspecting the filters roughly every 90 days and replacing the supply-air filter about every 6 months, or more often in dusty homes or during wildfire season. The ERV has light and sound indicators to remind you when service is due. For replacement filters, use the OEM Intelli-Balance 100 MERV 8 filter (FV-FL0810VE1) or upgrade to the Intelli-Balance 100 MERV 13 filter (FV-FL1310VE1).

Q: How do I know what size ERV I need?

A: Start with your home’s floor area, layout and airtightness, then map that to a design CFM range. Many modern Canadian homes land between 80–120 CFM for continuous ventilation, while compact suites may land closer to 50–80 CFM. To see where Intelli-Balance 100 fits against BalancedHome ERVs, review our Best Panasonic ERV Systems in Canada (2025) guide , then confirm final sizing with your ventilation designer or contractor.

Q: What’s the difference between FV-10VE2 and FV-10VEC2?

A: Both are Intelli-Balance 100 ERVs with adjustable 30–100 CFM and SmartFlow™ DC motors. FV-10VE2 is the temperate-climate, corded model that goes into standby below about −10 °C; FV-10VEC2 and FV-10VEC2R add “any climate” cold-weather strategies and mirror-port options for more extreme Canadian climates and tricky duct layouts.

Compare & Other Models

For compact homes, condos and suites, you can compare FV-10VE2 with the any-climate Intelli-Balance 100 models FV-10VEC2 and FV-10VEC2R. For larger homes or projects needing higher CFMs and more flexibility, consider BalancedHome models such as FV-12VE1T, FV-12VE1S, FV-13VEC1T, FV-13VEC1S, FV-15VE1T, FV-15VE1S, FV-16VEC1T, FV-16VEC1S or FV-20VEC1.

For more Panasonic options, browse our Panasonic brand collection and the dedicated Panasonic Energy Recovery Ventilators (ERV) collection.

Want to compare other capacities and port configurations? Browse all Panasonic ERV models for Canadian homes and suites .