Lutron Caseta Smart Lighting Controls Canada

Lutron Caséta Canada — smart dimmers, smart switches, Pico remotes, hubs, starter kits, sensors, plug-in controls, fan controls, and system accessories

Lutron Caséta Smart Lighting Controls Canada is the primary Caséta ecosystem hub for buyers comparing smart dimmers, smart switches, Pico remote paths, Smart Hub and Smart Hub PRO bridges, starter kits, wireless sensors, fan controls, plug-in lamp dimmers, outdoor smart plugs, range extenders, and accessory switches. Use this page when the buyer knows they want Caséta but still needs to choose the right device type, load-control path, hub requirement, kit, accessory, or system boundary.

If the project is broader than Caséta, use the main Lutron Smart Lighting Controls hub. If the buyer is choosing by control type instead of ecosystem, compare Lutron Dimmers, Lutron Smart Switches, Lutron Pico Remotes, Lutron Smart Hubs, and Lutron Motion Sensors.

Verify before ordering: Caséta products are selected by load type, dimming vs switching, neutral availability, ELV/phase-control requirements, fan-control requirements, hub requirements, Pico pairing, sensor behaviour, range/repeater needs, outdoor or plug-in use, wallplate/finish family, and local installation requirements. Confirm the exact product page and manufacturer documentation before treating any Caséta dimmer, switch, hub, kit, sensor, Pico remote, plug-in control, accessory switch, repeater, or outdoor plug as compatible.

Start here: choose the right Caséta path

Use this table to route Caséta intent into the correct product family before comparing finishes, load ratings, hub needs, Pico remotes, sensors, kits, accessories, and wiring requirements. This is a decision aid, not a compatibility guarantee.

Buyer need	Start here	Also compare	Why to review it
No-neutral Diva-style smart dimming	Lutron DVRF-6L Caséta Diva Smart Dimmer	PD-6WCL Original Smart Dimmer · Lutron LED Dimmers · Pico Remotes	Use when the project needs Caséta smart dimming for a compatible standard dimmable lighting load and Diva-style paddle control is preferred.
ELV+ / phase-selectable smart dimming	Lutron DVRF-5NE Diva Smart Dimmer ELV+	PD-5NE Original ELV+ Smart Dimmer · Lutron ELV Dimmers · LED Drivers	Review when the selected fixture, transformer, or driver points toward ELV, reverse-phase, or phase-selectable control rather than standard LED+ dimming.
Smart on/off switching with Claro style	Lutron DVRF-5NS Caséta Claro Smart Switch	DVRF-PKG1S Switch + Pico Kit · Lutron Smart Switches · Diva & Claro	Use when the circuit should switch on/off instead of dimming and the buyer wants a Claro-style Caséta control path.
Original Caséta smart switch / neutral-required path	Lutron PD-6ANS Caséta Smart Switch	PD-5WS-DV PRO Smart Switch · P-PKG1WS 3-Way Kit · Smart Switches	Review when the project calls for the original Caséta switch family and the wiring/load requirements support the selected model.
Smart Hub / bridge path	Lutron L-BDG2 Caséta Smart Hub	L-BDGPRO2 Smart Hub PRO · Lutron Smart Hubs · Starter Kits	Use when the buyer needs hub-supported Caséta planning, system expansion, or a bridge path before choosing individual controls.
PRO bridge / integration-focused hub path	Lutron L-BDGPRO2 Caséta Smart Hub PRO	L-BDG2 Standard Smart Hub · PD-REP Repeater · Smart Hubs	Review when the project needs the PRO hub route, larger-system planning, or integration-oriented Caséta setup.
Wireless sensor path	Lutron PD-OSENS Caséta Smart Motion Sensor	PD-VSENS Vacancy Sensor · Lutron Motion Sensors · Lighting Sensors	Use when the Caséta project needs occupancy or vacancy behaviour rather than a basic wall switch or dimmer decision.
Plug-in lamp dimming	Lutron PD-3PCL Caséta Plug-In Lamp Dimmer	P-PKG1P Lamp Dimmer + Pico Kit · P-BDG-PKG1W Starter Kit · Pico Remotes	Use when the buyer is controlling plug-in lamps rather than an in-wall lighting load.
Outdoor smart plug path	Lutron PD-15OUT Caséta Outdoor Smart Plug	Outdoor & Landscape Lights · Lutron Smart Hubs · Controls Hub	Use when the project is plug-in outdoor on/off control rather than in-wall dimming, switching, or landscape transformer control.
Fan control within Caséta	Lutron PD-FSQN Caséta Smart Fan Control	Lutron Fan Controls · Bathroom Fans · Lutron Hub	Use only when the load is a compatible fan-control path. Do not substitute a light dimmer or smart switch for fan speed control.
Accessory switch / companion role	Lutron DVRF-AS Claro Smart Accessory Switch	Lutron Companions · Pico Remotes · DVRF-5NS Primary Switch	Use only where the selected primary Caséta control and wiring/system plan support an accessory-switch role.
Range or system-expansion support	Lutron PD-REP Caséta Wireless Repeater	Lutron Smart Hubs · L-BDGPRO2 Smart Hub PRO · Lutron Hub	Use when the project is about Caséta system layout or range support, not a primary lighting control.

Important product-type boundary

This collection is built from Lutron products with Caseta in the title. It can include in-wall smart dimmers, in-wall smart switches, ELV+ dimmers, accessory switches, hubs, repeaters, starter kits, plug-in lamp dimmers, outdoor smart plugs, wireless sensors, fan controls, audio/Pico kits, and system accessories. Check the product type before ordering so you do not substitute a hub, repeater, kit, accessory switch, sensor, plug-in control, fan control, or outdoor plug for a primary wall dimmer or switch.

Caséta is an ecosystem, not a single product type. Choose the load and control workflow first, then select the matching Caséta device, hub, kit, Pico, or accessory path.

Shop Lutron Caséta by product type

Smart dimmers: compare DVRF-6L, PD-6WCL, DVRF-5NE, and PD-5NE.
Smart switches: compare DVRF-5NS, PD-6ANS, PD-5WS-DV, and Lutron Smart Switches.
Hubs and repeaters: compare L-BDG2, L-BDGPRO2, PD-REP, and Lutron Smart Hubs.
Starter kits: compare P-BDG-PKG1W, P-DIM-3WAY, P-BDG-PKG2WS, and P-BDG-PKG1WS.
Sensors: compare PD-OSENS, PD-VSENS, Lutron Motion Sensors, and Lighting Sensors Canada.
Plug-in and outdoor controls: compare PD-3PCL, P-PKG1P, PD-15OUT, and the fixture/load being controlled.
Fan and accessory paths: review PD-FSQN, DVRF-AS, Lutron Fan Controls, and Lutron Companions.

Choose by Caséta project

One-room smart dimming: verify the lighting load first, then compare DVRF-6L, PD-6WCL, Pico remote paths, and starter kits.
Whole-home or multi-room Caséta: start with Lutron Smart Hubs, starter kits, Pico remotes, and system range planning before choosing individual controls.
On/off switching: use Lutron Smart Switches when the circuit should switch on/off rather than dim.
ELV or specialty fixture dimming: use Lutron ELV Dimmers and fixture/driver documentation before choosing a Caséta ELV+ model.
Automatic control: use Caséta wireless sensors or the broader Lutron Motion Sensors path when occupancy/vacancy behaviour is required.
Outdoor or plug-in lighting: separate outdoor smart plugs and plug-in lamp dimmers from in-wall dimmers and switches before ordering.

When Caséta may not be the right starting point

Use Lutron Dimmers when the buyer wants all Lutron dimmer families, including non-Caséta options.
Use Lutron LED Dimmers, Lutron ELV Dimmers, Lutron MLV Dimmers, or Lutron 0-10V Dimmers when the load requirement should determine the control family first.
Use Lutron Maestro or Lutron Diva & Claro when the project is style/family-led instead of Caséta ecosystem-led.
Use Lutron Wallplates when the buyer only needs wallplates or finish matching.
Use Pot Lights Canada, Lotus LED Lights, or LED Drivers when the fixture or driver has not been selected yet.

What to confirm before ordering Lutron Caséta

Whether the product is a primary wall dimmer, wall switch, ELV+ dimmer, hub, PRO hub, repeater, Pico kit, starter kit, plug-in lamp dimmer, outdoor smart plug, sensor, fan control, or accessory switch.
Load type: standard dimmable LED, ELV/phase-selectable load, on/off lighting load, compatible fan load, plug-in lamp, outdoor plug-in load, or sensor-controlled zone.
Wiring condition: neutral availability, single-pole, 3-way/multi-location, accessory-switch support, Pico remote plan, wallbox/device space, and retrofit constraints.
Hub requirement: local wall control only, Pico remote control, app-supported setup, starter kit, Smart Hub, Smart Hub PRO, or range/repeater planning.
Finish family, wallplate gang count, and whether accessories should be selected with the primary control device.
Exact product documentation and manufacturer compatibility guidance before installation.

Lutron Caséta FAQ

Where should I start with Lutron Caséta?

Start by deciding whether the project needs dimming, switching, plug-in lamp control, outdoor plug control, sensor behaviour, fan control, or hub-supported system control. Then choose the matching Caséta product family.

Do I need a Lutron Smart Hub for Caséta?

A Smart Hub or Smart Hub PRO may be required for supported app-based or system-level workflows. Local wall control, Pico pairing, starter kits, and hub-supported features should be verified on the selected product documentation.

What is the difference between a Caséta smart dimmer and smart switch?

A smart dimmer adjusts brightness for compatible dimmable loads. A smart switch controls on/off operation. Choose the load and desired control behaviour before selecting the product.

When should I choose DVRF-5NE or PD-5NE?

Choose the ELV+ path only when the selected fixture, transformer, or driver requires ELV, reverse-phase, or phase-selectable dimming. Use standard LED dimmer paths when the load does not require ELV+.

Are Pico remotes, hubs, repeaters, and accessory switches primary controls?

Not always. Pico remotes, hubs, repeaters, and accessory switches can be system components or secondary controls. Confirm the primary device and system plan before selecting accessories.

Quick category guide

What this category is for

Lutron Caséta Canada — smart dimmers, smart switches, Pico remotes, hubs, starter kits, sensors, plug-in controls, fan controls, and system accessories Lutron Caséta Smart L...