Lutron Dimmers Canada - Smart, LED, ELV & MLV Controls

Lutron Dimmers Canada — Caséta, Diva, Maestro, Sunnata, LED+, ELV, MLV, 0-10V, sensor dimmers, companion dimmers, and dimmer kits

Lutron Dimmers Canada is the Lutron-specific dimmer parent hub for buyers choosing brightness control across Caséta smart dimmers, Diva dimmers, Maestro dimmers, Sunnata dimmers, LED+ dimmers, ELV dimmers, MLV dimmers, 0-10V dimmers, sensor dimmers, companion dimmers, plug-in dimmers, dimmer kits, and fixture/load-specific dimming paths. Use this collection when the buyer already wants a Lutron dimming solution and needs to narrow by load type, dimming method, wiring condition, smart-control system, device family, companion path, or finish family.

This collection is governed by a simple smart rule: Vendor = Lutron and title contains Dimmer. Because of that title logic, it can include primary wall dimmers, smart dimmers, sensor dimmers, 0-10V dimmers, ELV/MLV specialty dimmers, companion dimmers, plug-in dimmers, starter kits, dimmer bundles, and some faceplate or accessory products that include dimmer language. If the buyer is still comparing Lutron against non-Lutron dimmers, use Dimmer Switches Canada. If the project is broader than dimming, use Dimmers, Switches & Lighting Controls.

Verify before ordering: Lutron dimmers are selected by fixture or driver compatibility, load type, dimming method, voltage, neutral availability, single-pole or multi-location wiring, smart-home path, companion-device support, sensor behaviour, wallbox depth, finish family, wallplate plan, and manufacturer documentation. Confirm the exact product page before treating any Lutron dimmer, smart dimmer, sensor dimmer, companion dimmer, plug-in dimmer, starter kit, faceplate kit, Pico route, hub route, or accessory as compatible.

Start here: choose the right Lutron dimmer path

Use this table to route Lutron dimmer intent into the right family before comparing variants, finishes, load ratings, wiring requirements, and accessories. This is a decision aid, not a compatibility guarantee.

Buyer need	Start here	Also compare	Why to review it
Caséta smart dimming / retrofit path	Lutron DVRF-6L Caséta Diva Smart Dimmer	PD-6WCL Original Caséta Dimmer · Lutron Caséta · Pico Remotes · Smart Hubs	Use when the project needs app-supported dimming, scenes, schedules, Pico remote paths, or a Caséta-compatible smart-control route.
Caséta ELV+ / phase-selectable smart dimming	Lutron DVRF-5NE Diva Smart Dimmer ELV+	PD-5NE Caséta ELV+ Dimmer · Lutron ELV Dimmers · LED Drivers · Caséta	Review when the selected fixture, transformer, or driver points toward ELV, reverse-phase, forward-phase, or phase-selectable dimming.
Diva LED+ local dimming	Lutron DVCL-153P Diva LED+ Dimmer	DVSCCL-153P Satin Diva LED+ · DVCL-253P Higher-Capacity Path · DVCL-153PH Wallplate Kit · Lutron LED Dimmers	Use when the buyer wants a familiar Diva paddle-style local dimmer for a compatible dimmable lighting load.
Maestro LED+ tap-style dimming	Lutron MACL-153M Maestro LED+ Dimmer	MACL-153MH Retail Path · MACL-153MRHW Companion Kit · Lutron Maestro · Lutron Companions	Use when the buyer prefers Maestro-style tap control, Maestro family routing, or companion-kit planning for compatible dimmable lighting.
Sunnata / Maestro PRO universal dimming	Lutron ST-PRO-N Sunnata PRO LED+ Universal Dimmer	MA-PRO Maestro PRO · ST-RD Sunnata Companion Dimmer · ELV Dimmers · MLV Dimmers	Review when the project needs broader specialty-load support, phase-selectable planning, or Sunnata/Maestro PRO family routing.
0-10V commercial or driver-based dimming	Lutron 0-10V Dimmers	DVSTV Diva 0-10V Dimmer · MS-Z101 0-10V Sensor Dimmer · MS-Z101-V Vacancy Sensor Dimmer · Commercial LED Lighting	Use when the selected fixture or driver uses 0-10V control wiring, especially in commercial or project-grade lighting paths.
MLV magnetic low-voltage dimming	Lutron MLV Dimmers	MSCLV-600M Maestro MLV Dimmer · MSCLV-1000M Maestro MLV Dimmer · MSCLV-1000M Finish Options	Use only when the transformer or load path requires magnetic low-voltage dimming. Verify transformer and load requirements before ordering.
ELV electronic low-voltage dimming	Lutron ELV Dimmers	DVELV-303P Diva ELV · DVSCELV-300P Satin ELV · MAELV-600 Maestro ELV · LED Drivers	Use when the selected fixture, transformer, or LED driver requires an ELV/reverse-phase-style dimming path.
Sensor dimming with occupancy or vacancy behaviour	Lutron MSCL-OP153M Maestro LED+ Motion Sensor Dimmer	MSCL-VP153M Vacancy Sensor Dimmer · MSCL-OP153MH Retail Path · Lighting Sensors Canada · Lutron Motion Sensors	Use when the buyer needs brightness control and sensing logic together, not just a sensor switch or standard dimmer.
Plug-in lamp dimming / Caséta plug-in routes	Lutron PD-3PCL Caséta Plug-In Lamp Dimmer	P-PKG1P Plug-In Dimmer + Pico Kit · P-BDG-PKG1P Bridge Kit · P-BDG-PKG2P Two Plug-In Dimmer Kit · Lutron Caséta	Use when the controlled load is a compatible plug-in lamp rather than an in-wall lighting circuit.
Starter kit, companion, or accessory boundary	Lutron Starter Kits	Lutron Companions · ST-RD Companion Dimmer · MK-D Maestro Colour Change Kit · Wallplates	Use when the buyer needs a kit, companion, wallplate, or finish/accessory item after the primary dimmer has been selected.
Fixture or driver not selected yet	Pot Lights Canada	Lotus LED Lights · Reno Lighting · LED Drivers · LED Tape Light	Choose the fixture, driver, transformer, tape system, or lighting load first when the required dimming method is unknown.

Important product-type boundary

This collection is built from Lutron products with Dimmer in the title. It can include primary dimmers, smart dimmers, sensor dimmers, 0-10V dimmers, MLV dimmers, ELV dimmers, companion dimmers, dimmer kits, plug-in dimmers, starter kits, faceplate/colour-change kits, and hub/Pico bundles that include dimmer products. Check the product type before ordering so you do not substitute a companion device, kit, Pico/hub bundle, faceplate, wallplate, or accessory for the primary wall dimmer required by the load.

Lutron dimmers are not interchangeable across every fixture, lamp, LED driver, transformer, fan load, low-voltage tape system, plug-in lamp, or commercial load. Choose the load or fixture family first when compatibility is uncertain, then verify the exact Lutron model.

Shop Lutron dimmers by type

LED+ dimmers: compare Lutron LED Dimmers, DVCL-153P, DVSCCL-153P, DVCL-253P, and MACL-153M.
Caséta smart dimmers: compare Lutron Caséta, DVRF-6L, PD-6WCL, DVRF-5NE, compatible hub paths, and Pico remote paths.
ELV and phase-selectable dimmers: compare Lutron ELV Dimmers, DVRF-5NE, PD-5NE, DVELV-303P, MA-PRO, and ST-PRO-N.
MLV dimmers: use Lutron MLV Dimmers only where the transformer/load path requires magnetic low-voltage control.
0-10V dimmers: use Lutron 0-10V Dimmers for compatible 0-10V drivers and commercial lighting controls.
Sensor dimmers: compare MSCL-OP153M, MSCL-VP153M, MS-Z101, and MS-Z101-V.
Plug-in dimmers: compare PD-3PCL, P-PKG1P, P-BDG-PKG1P, and P-BDG-PKG2P.
Companion and accessory paths: review Lutron Companions, Pico Remotes, Starter Kits, and Wallplates only after the primary dimmer path is confirmed.

Choose by Lutron dimmer family

Diva: use Lutron Diva & Claro when paddle-style control, Diva smart dimmers, Diva LED+ dimmers, Claro wallplates, receptacles, and finish matching matter.
Maestro: use Lutron Maestro when tap-style control, LED+ dimmers, sensor dimmers, timers, companions, or Maestro multi-location logic matter.
Sunnata: use ST-PRO-N, ST-RD, and related Sunnata routes when the project calls for touch-style controls and the selected model fits the load and wiring path.
Caséta: use Lutron Caséta when connected dimming, app control, Pico remotes, hubs, scenes, schedules, or starter kits are part of the project.

Pair Lutron dimmers with the right lighting and load categories

Pot Lights Canada — choose the recessed fixture before finalizing the dimmer path.
Lotus LED Lights Canada — Lotus fixture, driver, trim, and accessory paths.
Reno Lighting — Reno lighting fixture paths.
LED Drivers and Power Supplies — verify voltage, wattage, and dimming method before choosing controls.
LED Tape Light Canada — low-voltage tape and driver systems need system-level control verification.
LED Panels & Troffers and Commercial LED Lighting — use where 0-10V, sensor, commercial-voltage, or project-grade control decisions are tied to the fixture family.

When this is not the right collection

Use Dimmer Switches Canada when the buyer is comparing Lutron against non-Lutron dimmers.
Use Lutron Smart Switches when the project needs smart on/off switching instead of brightness control.
Use Lutron Fan Controls when the load is a ceiling fan or fan/light workflow.
Use Lighting Sensors Canada or Lutron Motion Sensors when sensing is the primary requirement and dimming is not needed.
Use Lutron Wallplates, Lutron Receptacles, or USB-C PD Wall Outlets when the buyer needs finish plates, outlets, or charging instead of lighting dimming.
Use Dimmers, Switches & Lighting Controls when the buyer is still choosing between dimmers, switches, sensors, hubs, remotes, outlets, and accessories.

What to confirm before ordering Lutron dimmers

Whether the product is a primary dimmer, smart dimmer, sensor dimmer, companion dimmer, plug-in dimmer, faceplate kit, starter kit, wallplate, Pico/hub path, or accessory.
Load type: dimmable LED, ELV, MLV, 0-10V, incandescent/halogen, low-voltage tape, specialty LED driver, commercial fixture, transformer, plug-in lamp, or fan load.
Wiring condition: neutral availability, single-pole, 3-way, 4-way, multi-location, companion-device needs, wallbox depth, and retrofit constraints.
Smart-control path: Caséta, Pico remote, hub/bridge, starter kit, app control, scenes, schedules, or non-smart local dimming.
Fixture, lamp, transformer, and driver compatibility listed on the exact product page and manufacturer documentation.
Finish family, wallplate gang count, and whether accessories should be selected with the primary control device.

Lutron Dimmer FAQ

Where should I start if I only know I need a Lutron dimmer?

Start with this Lutron Dimmers collection, then narrow by LED+, Caséta smart dimming, ELV, MLV, 0-10V, Diva, Maestro, Sunnata, sensor dimming, plug-in dimming, or companion-device requirements.

What is the difference between Lutron LED, ELV, MLV, and 0-10V dimmers?

LED dimmers are used for compatible dimmable LED lighting loads. ELV dimmers support electronic low-voltage or reverse-phase applications. MLV dimmers support magnetic low-voltage applications. 0-10V dimmers are used with compatible 0-10V fixtures or drivers.

Should I choose Diva, Maestro, Sunnata, or Caséta?

Choose by project requirement and control style. Diva is a familiar paddle-style path, Maestro is a tap-control and advanced wallbox family, Sunnata is a touch-style family, and Caséta is the smart-control ecosystem path. Verify the exact model against the load and wiring.

Do all Lutron dimmers work without a neutral wire?

No. Neutral requirements depend on the exact model, load type, and dimming method. Verify the selected dimmer documentation before ordering, especially for smart, ELV+, phase-selectable, 0-10V, sensor, and higher-load applications.

Are companion dimmers and faceplate kits primary dimmers?

Not always. Companion dimmers, Pico remotes, faceplate kits, wallplates, hubs, and starter kits can be accessory or system components. Confirm the primary dimmer first, then choose compatible accessories.

Quick category guide

What this category is for

Lutron Dimmers Canada — Caséta, Diva, Maestro, Sunnata, LED+, ELV, MLV, 0-10V, sensor dimmers, companion dimmers, and dimmer kits Lutron Dimmers Canada is the Lutron-specifi...