⚡ Quick Answer: Best Reno & Retrofit Deals in Canada

⚡ Quick Answer: The best Black Friday smart home renovation and retrofit deals in Canada are the Lotus DS-LED-4-S12W-5CCT 4” Indirect Slim Recessed LED (Best Everyday Ceiling Upgrade), the Lotus Tangra Gimbal Series (L3G-RSW / L3G-SSW / L3G-SST / L3G-SIT / L3G-RIF) (Best Premium Architectural Ceilings), the Panasonic Whisper Air Repair FV01VCN1 + Swidget S16001WA + WI005UWA (Best Bathroom & Basement IAQ Stack), the EcoNet Bulldog-IV-RC-JW Starter Kit EVC300-IV-RC-JW-HC2LXL + Battery Backup (Best Reno-Stage Leak Protection), and the Comtrend G.hn Powerline Kits PG-9172-KIT / GPL-1200-KIT (Best Network Backbone for Finished Basements & Offices).

• Sale Status: 🔴 Black Friday & Cyber Monday 2025 deals are live in Canada — always confirm current pricing and stock on simplysecured.ca before you finalize your reno bill of materials.
• Pricing: All examples below are CAD from Canadian channels — no surprise duties or US brokerage.
• Key Black Friday Deals (from your live table):
  • Lotus DS-LED-4-S12W-5CCT: $40.00 → $36.00 (10.00% off)
  • Lotus Tangra 4” Gimbal Round Sloped Wide Trim L3G-RSW-WH: $171.00 → $154.00 (9.94% off)
  • Lotus Tangra trims (L3G-SSW / L3G-SST / L3G-SIT / L3G-RIF series): $180.00 → $162.25 (≈9.86% off)
  • Panasonic Whisper Air Repair FV01VCN1: $159.99 → $149.99 (6.25% off)
  • Swidget On-Off Switch S16001WA: $92.25 → $46.13 (50.00% off)
  • Swidget WiFi + Temp/Humidity Module WI005UWA: $92.25 → $46.13 (≈49.99% off)
  • EcoNet Bulldog-IV-RC-JW Starter Kit EVC300-IV-RC-JW-HC2LXL: $363.00 → $356.99 (1.65% off)
  • EcoNet Battery Backup (12V/5V 3000mAh): $50.00 → $47.99 (4.02% off)
  • Comtrend PG-9172-KIT 1200 Mbps G.hn Powerline Adapter Kit: $159.99 → $145.99 (8.75% off)
  • Comtrend GPL-1200-KIT Powerline 1200 Mbps Kit: $116.00 → $95.00 (18.10% off)

At a Glance: Reno & Retrofit Smart Home Deals (Canada)

Why Trust Simply Secured for Reno & Retrofit Smart Home Planning?

When you’re renovating, bad smart choices can lock you into wiring mistakes for decades. That’s what we’re trying to avoid.

• Reno-first thinking: We plan around studs, joists, beams, vapour barriers, panels and plumbing, not just pretty devices on a whiteboard.
• Brand stack, not random gadgets: Our recommendations combine Lotus, Panasonic, Swidget, EcoNet and Comtrend into systems that are realistic for Canadian renos and retrofits.
• We see the project lifecycle: We’ve watched projects from “demo day” to “first winter in the new basement.” We remember what failed, what worked, and what homeowners actually used.
• No fake urgency: If pushing a leak valve or fancy gimbal light will ruin your budget for insulation and proper ventilation, we’ll say so. Safety and building envelope matter first.

Best Ceiling Lighting Package for Canadian Renos — Lotus DS-LED-4-S12W-5CCT + Tangra Accents

The Deal

For most Canadian renovations, the ceiling lighting backbone is:

• Lotus DS-LED-4-S12W-5CCT 4” Round Indirect Slim Recessed: $40.00 → $36.00 (10% off)
• Lotus Tangra trims (L3G-RSW, L3G-SSW, L3G-SST, L3G-SIT, L3G-RIF series): from $171.00 → $154.00 (L3G-RSW-WH) and $180.00 → $162.25 (≈9.86% off on most decorative trims)

You use DS-LED-4 as the everyday workhorse, then layer Tangra where you want an architectural boost — sloped ceilings, feature walls and main living spaces.

Why We Picked It

This combo makes sense for renos because:

• DS-LED-4 is slim and forgiving, perfect for basements, kitchens and halls with ductwork and mixed framing.
• Tangra lets you upgrade key sightlines — entries, great rooms, fireplaces — without putting premium fixtures in every closet.
• Both are Lotus lines designed with Canadian plenum and code realities in mind.

Instead of peppering the house with random fixtures, you end up with a coherent ceiling plan.

👨‍🔧 Installer’s Take

On “walls open” renos we:

• Mark out lighting grids on subfloor or joists before drywall so DS-LED-4 spacing and Tangra accents feel intentional.
• Coordinate with vents, sprinklers, beams and bulkheads; potlights don’t go everywhere you want them to in Canadian framing.
• Use Tangra gimbals to solve tricky situations: sloped ceilings, art walls, stone fireplaces and double-height entries.

On retrofits with walls closed:

• We lean more on DS-LED-4, using its slim profile to avoid major drywall work.
• We retrofit Tangra only where access and depth are sufficient and where the visual payoff is worth it.

Check Compatibility

• Confirm DS-LED-4 and Tangra variants meet the location rating (dry/damp/wet) for each area.
• Ensure joist layout, insulation and vapour barrier details are sorted before you commit to fixture counts.
• Plan driver access and future serviceability — especially for Tangra systems.

Best Bathroom & Laundry Reno Stack — Panasonic FV01VCN1 + Swidget S16001WA + WI005UWA

The Deal

For bathrooms, ensuites and laundry rooms, our go-to Black Friday IAQ stack is:

• Panasonic Whisper Air Repair FV01VCN1: $159.99 → $149.99 (6.25% off)
• Swidget On-Off Switch S16001WA: $92.25 → $46.13 (50% off)
• Swidget WiFi + Temp/Humidity Module WI005UWA: $92.25 → $46.13 (≈49.99% off)

This gives you modern IAQ hardware plus real automation while the walls and ceilings are open.

Why We Picked It

In renos, this stack:

• Tackles moisture and odours in spaces where mould and peeling paint are common.
• Automates fan operation based on actual humidity, not whether someone remembered to flip a switch.
• Is much easier to rough-in while you’re already pulling new cable and installing new boxes.

For finished basements with new baths and laundry, this stack is a no-brainer.

👨‍🔧 Installer’s Take

On bathroom and laundry renos we:

• Size the fan properly (CFM vs room size, duct length and number of elbows) so automation has something to work with.
• Use Swidget to ensure the fan runs long enough after showers and laundry cycles, especially in winter.
• Route ductwork to minimize condensation risk in cold attics — a huge issue in Canadian climates.

When retrofitting with walls closed:

• Swapping the fan is trickier but still feasible in many cases.
• Smart switches may be limited by box depth and wiring; this is where we check before promising anything.

Check Compatibility

• Fan, switch and module are all installed according to Canadian electrical and mechanical code.
• Box depth supports Swidget plus the module; adjust boxes during reno if needed.
• WiFi coverage is strong in baths and laundry (often near exterior walls).

Best Reno-Stage Leak & Flood Protection — EcoNet Bulldog-IV-RC-JW Starter Kit + Battery Backup

The Deal

The EcoNet Bulldog-IV-RC-JW Starter Kit (EVC300-IV-RC-JW-HC2LXL) is discounted from $363.00 to $356.99, and the EcoNet Battery Backup 12V/5V 3000mAh goes from $50.00 to $47.99.

During a reno, when plumbers are already touching the main line, this is the ideal time to add automatic water shutoff.

Why We Picked It

We prioritise Bulldog at reno time because:

• The plumber is already cutting, sweating and aligning valves, making it cost-effective to add the actuator.
• You can design clean cable runs and enclosures while framing is open instead of surface-mounting everything later.
• Finished basements and high-end renos are exactly where water damage hurts most.

If you’re finishing a basement, adding or moving a mechanical room, or renovating a laundry on the second floor, it’s hard to argue against this upgrade.

👨‍🔧 Installer’s Take

On renos we:

• Coordinate with the plumbing contractor early so they can plan for the Bulldog valve placement, clearances and supports.
• Place conduit or wiring paths for control and backup power before drywall.
• Decide where any leak sensors or relay contacts will go in the new space (sump, water heater, laundry, bathrooms).

On retrofits:

• Access to the main line can be tight and messy, especially in old mechanical rooms full of storage.
• We may need drywall cuts or ceiling access that could have been avoided if planned during reno.

Check Compatibility

• Main water line and valve orientation support the Bulldog actuator and mounting hardware.
• Mechanical room layout leaves service space for the valve and anybody working on it later.
• You’re comfortable testing the system at least once a year and maintaining battery backup.

Best Network Backbone for Finished Basements & Offices — Comtrend PG-9172-KIT / GPL-1200-KIT

The Deal

Two key G.hn powerline kits on sale:

• Comtrend PG-9172-KIT 1200 Mbps G.hn Powerline Adapter Kit: $159.99 → $145.99 (8.75% off)
• Comtrend GPL-1200-KIT Powerline 1200 Mbps Kit: $116.00 → $95.00 (18.10% off)

You plug one adapter near your router and another where you need a wired connection — perfect for finished spaces where new Ethernet runs are expensive or disruptive.

Why We Picked It

For renos and retrofits, G.hn makes sense because:

• It uses existing electrical wiring to deliver near-Ethernet connectivity, avoiding drywall repair.
• It’s ideal for basement suites, home offices, media rooms and network closets added during a reno.
• Once your backbone is solid, your smart lighting, cameras, Swidget modules and IAQ gear behave far more reliably.

During renos, we try to design with both power and data in mind. Comtrend helps when data cabling is limited.

👨‍🔧 Installer’s Take

On real projects we:

• Test a few candidate outlets to find the best-performing circuits for each adapter pair.
• Avoid plugging adapters into surge strips or power bars; wall outlets are best.
• Combine G.hn backbones with good WiFi access points to cover all floors and additions.

Retrofit challenges:

• Very old or heavily-loaded electrical systems can reduce speeds.
• Multiple panels or subpanels complicate where adapters will talk best.
• We often do a quick on-site stress test before promising gigabit-like performance.

Check Compatibility

• Standard 120 V outlets on the same electrical system (and ideally same phase).
• Panel and wiring are in good condition; serious electrical issues should be resolved first.
• You’re okay with testing and possibly repositioning adapters during setup.

Best Smart Control Backbone for Reno Projects — Swidget SD3001WA + Outlets & Modules

The Deal

For a “walls open” smart control package:

• Swidget Dimmer SD3001WA: $113.25 → $56.63 (50% off)
• Swidget On-Off Switch S16001WA: $92.25 → $46.13 (50% off)
• Swidget 15A Outlet R1015SWA: $88.00 → $44.00 (50% off)
• WiFi Control Module WI000UWA: $54.50 → $27.25 (50% off)
• WiFi + Guidelight Module WI002UWA: $73.50 → $36.75 (50% off)

Reno time is the best time to upgrade boxes, wiring and neutral availability so these devices drop in cleanly.

Why We Picked It

Swidget is a strong reno backbone because:

• You can standardize devices (one dimmer, one switch, one outlet family) and change modules later as needs evolve.
• It supports both “normal” wall usage and smart logic (WiFi, sensors) for those who care.
• With ~50% off, it’s finally realistic to specify for multiple rooms without blowing the budget.

Think: main living/dining, kitchen, stairs, basement landing and primary bedroom.

👨‍🔧 Installer’s Take

In renos we:

• Upgrade shallow or overfilled boxes to modern, deep ones while walls are open.
• Organize multi-gang boxes by function: e.g., Swidget dimmer + Swidget outlet for lighting and plugs in the same bank.
• Document which modules go where so homeowners (and future electricians) know what’s behind each faceplate.

On retrofits:

• We have far less flexibility; some boxes simply won’t accommodate smart gear without drywall work.
• It’s still possible to swap a few strategic locations, but we’re more constrained.

Check Compatibility

• Switch and outlet locations have proper wiring and neutrals.
• Box depth and layout are planned early in the reno, not as an afterthought.
• WiFi design is considered as part of the reno (AP locations, cable drops where possible).

Canada-Ready Reno & Retrofit Checklist

Before you commit your Black Friday reno cart:

• ✓ You have a basic room-by-room plan: what’s being opened, what stays closed, and where smart gear belongs.
• ✓ Electrical, lighting and ventilation plans are reviewed with a licensed electrician and/or mechanical contractor.
• ✓ You’ve chosen a primary lighting stack (Lotus), control stack (Swidget / Caseta) and network stack (Comtrend + router/APs).
• ✓ Leak protection and IAQ upgrades are planned where you’re already touching plumbing and baths.
• ✓ Fixtures and devices are CSA/cUL listed with correct temperature and location ratings for Canadian conditions.
• ✓ Panel capacity and key circuits (bathroom, kitchen, laundry, exterior) have been assessed for new loads.
• ✓ You know what must be done during “walls open” vs what can be retrofitted later.

Compatibility Micro Q&A (Voice-Search Style)

Should I buy my smart home gear before or after I finalize reno drawings?

Ideally, you buy after you have at least basic drawings and a room-by-room scope, but before drywall goes up. Drawings tell you where loads, switches and fixtures belong; gear selection then refines box depth, wiring runs and fixture cutouts. Black Friday is a good time to lock in known-good stacks like Lotus, Swidget, EcoNet and Comtrend once you’ve agreed on the broad layout.

What’s the biggest difference between “walls open” and “walls closed” smart upgrades?

With walls open, you can fix wiring, box depth, insulation details and ducting routes correctly — it’s the time to choose in-wall switches, outlets, leak valves and new circuits. With walls closed, you’re more limited to plug-in devices, surface runs and selective upgrades. We always recommend handling the heavy wiring and plumbing work while studs are visible; retrofits should be reserved for small enhancements.

Will G.hn powerline networking still help if I’m already running Ethernet in my reno?

Yes. We often use a mix of hardwired Ethernet and G.hn. When it’s easy to pull cable, we do; when structure or cost makes it unrealistic, powerline bridges the gap. In finished basements or existing upper floors, G.hn can save a lot of mess. We simply design the network so each area has at least one reliable wired drop via Ethernet or powerline.

Should I prioritize leak protection or better lighting during a basement reno?

If you’re finishing a basement or adding bedrooms down there, we usually prioritize leak protection first, then lighting. A burst pipe or failed fitting above finished space can cause massive damage. An EcoNet Bulldog valve plus a few strategically placed sensors is cheap insurance compared to redoing drywall and flooring. That said, don’t neglect lighting — Lotus fixtures make the space usable and safer day-to-day.

Canada-Specific Buying Advice: Using Black Friday for Reno & Retrofit

• Buy “infrastructure” first: Leak valves, fans, networking, boxes and switches are harder to change later than decor. Use Black Friday to secure these building blocks at a discount.
• Align with your trades: Share your chosen gear with your electrician, plumber and HVAC contractor before they quote. Canadian labour isn’t cheap — surprises on site cost more than any product discount.
• Avoid US-only specials for wired gear: For anything connected to mains power or plumbing, stick to Canadian-channel SKUs with CSA/cUL marks. Importing US-only switches or valves can cause headaches with inspections and insurance.
• Phase your smart upgrades: If budget is tight, design the wiring and locations now (neutrals, boxes, valve placement), but only buy as much smart hardware as you can afford safely. It’s easy to snap in more Swidget modules later.
• Think about next winter, not just move-in day: Proper ventilation, network, leak protection and lighting make a bigger difference in January at −25 °C than any feature wall or soundbar.

FAQ: Smart Home Renovation & Retrofit Deals (Black Friday in Canada)

1. Is Black Friday a good time to buy smart gear for a reno that’s months away?

Yes, as long as your reno scope is reasonably clear. Black Friday is ideal for non-perishable infrastructure: Lotus fixtures, Swidget devices, EcoNet valves and Comtrend adapters. These products don’t go stale. We just recommend having at least a basic plan so you don’t overbuy the wrong mix of switches, trims or networking gear that doesn’t match your final design.

2. What should I prioritize for a finished basement renovation?

For finished basements in Canada, we usually prioritize leak protection, ventilation and lighting. That means considering an EcoNet Bulldog valve and sensors, proper fans and IAQ control for any new bathrooms, and a Lotus lighting plan that actually makes the space usable. Networking via Comtrend and a few smart switches/outlets come next. Decorative tech should be the last layer, not the first.

3. How do I balance smart upgrades with code and inspection requirements?

Start with code and inspection requirements first. Make sure electrical, plumbing and mechanical work meets Canadian standards, and then overlay smart devices that respect those rules. Approved brands like Lotus, Panasonic, Swidget and EcoNet make it easier because they’re designed with North American codes in mind. Avoid cutting corners on junctions, box fill or ducting just to squeeze in a gadget.

4. Are powerline networking kits reliable enough for home offices and media rooms?

In many Canadian homes, yes. G.hn powerline kits from Comtrend are significantly more robust than older powerline standards and can be perfectly adequate for office work and streaming when circuits are reasonable. We always test a few outlets first and avoid surge strips and power bars. If your wiring is very old or complicated, we might mix G.hn with a few carefully placed Ethernet runs.

5. Can I handle smart switches and valves as DIY during a reno?

Some homeowners can complete parts of this work, but in Canada we strongly recommend using licensed electricians and plumbers for anything that ties into mains or main water lines. DIYing low-voltage sensors, plug-in modules and simple powerline adapters is more realistic. The high-value Black Friday upgrades — valves, in-wall switches, subpanels, new circuits — are best handled by trades.

6. Are there any smart upgrades that are easier to do after the reno?

Yes. Plug-in modules, Swidget inserts, WiFi access point placement and certain sensors are often easier to do once you’ve lived in the new space for a bit. We like to rough-in wiring, boxes and device locations during reno, then layer in some of the intelligence later when you better understand how you use each room.

7. How many smart switches and outlets should I plan per floor during a reno?

It depends on layout, but a reasonable starting point is 3–5 smart circuits per floor: main living area, kitchen, main hall/stairs and one or two bedroom/basement zones. Smart outlets for lamps and night lights go in a few strategic locations. You can always expand, but having a handful per floor gives you meaningful control without overcomplicating things.

CTA: Shop Smart Home Reno & Retrofit Deals in Canada

Browse all Black Friday smart home deals

Shop Lotus ceiling lighting
Shop smart switches, outlets & IAQ
Shop Comtrend networking kits