Alula 2GIG 345 Compatible Wireless CO Carbon Monoxide Alarm | RE215T
Couldn't load pickup availability
Love this product? Share the transformation and inspire others to upgrade their homes or businesses too!
Alula RE215T Wireless Carbon Monoxide (CO) Alarm – 2GIG Compatible
Carbon monoxide (CO) is invisible and odourless. The Alula RE215T is a wireless CO alarm built for 2GIG-compatible 345 MHz security ecosystems, providing both a loud local siren and a wireless alarm signal to your panel when dangerous CO is detected.
Canada-ready listings: CSA 6.19-01 and UL2034. These are the certifications most buyers look for when choosing a CO alarm for Canadian residential use.
Compatibility check (important): This model is for the 2GIG 345 MHz ecosystem. Confirm your panel supports 2GIG-compatible 345 MHz sensors before ordering.
- Compatibility: 2GIG-compatible wireless ecosystem (345 MHz)
- Listings: UL2034 and CSA 6.19-01 listed
- Audible alarm: 85 dBA at 10 ft (3 m) minimum
- Power: 2 × AAA alkaline batteries
- Operating temperature: 0°C to 40°C (indoor)
- Dimensions: 12.0 × 10.4 × 4.1 cm (4.7 × 4.1 × 1.6 in)
- Smart features: CO level memory indication + end-of-life notification
- Warranty: 5-year manufacturer warranty
Why the “T” model matters (RE215T vs standard CO sensors)
The RE215T adds two practical upgrades: CO memory (helps indicate a prior CO event) and an end-of-life notification so replacement isn’t forgotten over time. These are especially useful for troubleshooting intermittent appliance issues and for long-term maintenance.
Easy enrollment (DIY-friendly)
- Put your panel into wireless enrollment mode.
- Press and hold the TEST button for several seconds to send the enrollment signal.
- Confirm the device is learned by your panel, then mount and test.
Where to place a CO alarm (practical guidance)
For best protection, install CO alarms near sleeping areas and on each occupiable level of the home. Follow the manual’s spacing and placement guidance, and avoid drafty locations near windows, doors, or supply vents.
Placement tips (tap to expand)
- Outside each separate sleeping area (near bedrooms).
- On every occupiable level (including basements; exclude attics/crawl spaces).
- Relatively close to the breathing zone where occupants spend time.
- Avoid locations affected by drafts, high humidity, or cooking byproducts.
Testing & maintenance
- Testing: press the TEST button after installation and on a regular schedule (see manual).
- Batteries: replace AAA batteries when the unit indicates low battery.
- End-of-life: replace the unit when the end-of-life notification is indicated.
Technical specifications
| Model | RE215T |
|---|---|
| Wireless ecosystem | 2GIG-compatible (345 MHz) |
| Alarm volume | 85 dBA @ 10 ft (3 m) minimum |
| Power | 2 × AAA alkaline batteries |
| Operating temperature | 0°C to 40°C |
| Dimensions | 12.0 × 10.4 × 4.1 cm |
| Certifications/Listings | UL2034, CSA 6.19-01, FCC |
| Special features | CO memory indication; end-of-life notification |
| Warranty | 5 years |
Downloads
FAQ
Will the RE215T work with my 2GIG system?
The RE215T is designed for the 2GIG 345 MHz ecosystem. Confirm your panel supports 2GIG-compatible 345 MHz sensors before ordering.
What do CO memory and end-of-life notification do?
CO memory helps indicate a prior CO event, and end-of-life notification alerts you when the unit needs replacement due to age/service life. Always follow the manual for interpretation and next steps.
Note: Always follow the included installation guide and any local requirements. A CO alarm is not a substitute for proper installation and maintenance of fuel-burning appliances and ventilation systems.