Alula RE207T Outdoor Wireless Door / Gate Sensor – 2GIG 345 MHz (IP67) | RE207T
Couldn't load pickup availability
Love this product? Share the transformation and inspire others to upgrade their homes or businesses too!
Alula RE207T Outdoor Wireless Door / Gate Sensor – 2GIG 345 MHz (IP67)
Extend perimeter protection to the places that matter most—gates, sheds, detached garages, and storage buildings. The Alula RE207T is a wireless outdoor door/window and gate sensor designed for 2GIG-compatible 345 MHz security ecosystems. It’s built for larger properties and remote openings where indoor-only contacts and short-range devices fall short.
Why the RE207T is a top outdoor perimeter sensor
- Outdoor-rated enclosure: IP67 weatherproof protection
- Extreme temperature rated: -40°C to 70°C (Canadian winter ready)
- Wide magnetic gap: flexible placement on gates and imperfect outdoor frames
- Two built-in external contact zones: monitor multiple doors/windows/gates from one transmitter
- Secure signaling: supports encrypted wireless transmissions
- Tamper protection: cover tamper + optional removal tamper anchoring for installer-grade security
- Battery: CR123A with long-life positioning (listed as up to ~10 years in product notes)
- Warranty: 5-year manufacturer warranty
Common Canadian use-cases
- Pool gates and boundary gates (know when a gate is left open)
- Detached garages and shed doors (remote status + alerts)
- Storage buildings and outbuildings on acreage properties
- Service gates and fence gates with wide alignment tolerances
Enrollment (2GIG) – quick overview
- Enroll by serial number entry, or put the panel into wireless enrollment mode.
- Trip the device as instructed (e.g., battery-tab/tamper method or repeated open/close) to send the learn signal.
- Enroll as “Loop 2” (per product notes) and confirm the panel sees open/close changes.
- Mount the sensor and magnet, aligning the marks and tightening the securing screw.
Installation notes (outdoor best practices)
- Use screws for permanent installs; cable ties can be used where appropriate (not included).
- If using external contacts, route wires through the rear entry and reseal with silicone for weather resistance.
- For high-risk locations, use the removal tamper anchoring option to deter device removal.
Technical specifications
| Model | RE207T |
|---|---|
| Compatibility | 2GIG-compatible 345 MHz wireless ecosystems |
| Enclosure rating | IP67 weatherproof |
| External zones | Two built-in external contact zones |
| Install flexibility | Wide magnetic gap |
| Operating temperature | -40°C to 70°C (-40°F to 158°F) |
| Dimensions | 3.3 × 1.3 × 2.8 in (8.4 × 3.3 × 7.1 cm) |
| Battery | CR123A (long-life positioning; see manual for exact spec) |
| Warranty | 5 years |
| Availability | Normally ships in 5–7 days |
Downloads
FAQ
Will this work with my 2GIG system?
The RE207T is specified as 2GIG compatible and operates in the 345 MHz ecosystem. Confirm your panel/receiver supports 345 MHz 2GIG-compatible sensors before ordering.
What are the two external contact zones for?
External zones let one RE207T monitor multiple openings (for example, a shed door plus a gate) by wiring additional contacts. Follow the manual wiring instructions and reseal any wire entry for outdoor weather resistance.
Is it suitable for Canadian winters?
Yes—this sensor is rated for -40°C to 70°C and uses an IP67 enclosure for outdoor exposure.
Note: Always follow the installation manual and confirm panel compatibility and programming requirements.