Alula RE115 Wireless CO Alarm | Interlogix 319.5 MHz | RE115
Couldn't load pickup availability
Love this product? Share the transformation and inspire others to upgrade their homes or businesses too!
Alula RE115 Wireless Carbon Monoxide (CO) Alarm – 319.5 MHz
Carbon monoxide (CO) is invisible and odourless. The Alula RE115 is a wireless CO alarm designed for Interlogix/GE-style 319.5 MHz security ecosystems, providing a loud local siren plus a wireless signal to your panel when CO is detected.
Canada-ready: Listed to CSA 6.19-01 and UL2034 for trusted CO life-safety use.
Compatibility check (important): This model is for 319.5 MHz systems. If you’re not sure what frequency your panel supports, confirm in the panel manual (or contact us) before ordering.
- Listings: UL2034 and CSA 6.19-01 listed
- Wireless frequency: 319.5 MHz (Interlogix/GE ecosystem)
- Audible alarm: 85 dBA at 10 ft (3 m) minimum
- Power: 2 × AAA alkaline batteries
- Programming (Interlogix compatible): Recommended Sensor Group 34
- Operating temperature: 0°C to 40°C (indoor)
- Dimensions: 12.0 × 10.4 × 4.1 cm (4.7 × 4.1 × 1.6 in)
- Warranty: 5-year manufacturer warranty
Easy enrollment (DIY-friendly)
- Put your panel into wireless enrollment mode.
- Press and hold the TEST button for several seconds to send the enrollment signal.
- Verify the zone/device is learned by your panel and then mount the alarm.
Where to place a CO alarm (practical guidance)
For best protection, install CO alarms near sleeping areas and on each occupiable level of the home. In rooms with fuel-burning appliances, follow the guide’s spacing/height recommendations and avoid drafty locations near windows, doors, or vents.
Placement tips (tap to expand)
- Outside each separate sleeping area (near bedrooms).
- On every occupiable level (including basements; exclude attics/crawl spaces).
- Relatively close to the breathing zone where occupants spend time.
- Avoid locations within 3 ft of cooking appliances and areas affected by drafts or humidity.
Testing & replacement
- Test cadence: test after installation and weekly thereafter.
- Service life: replace the CO alarm after approximately 10 years (see “replace by” label).
Technical specifications
| Model | RE115 |
|---|---|
| Wireless frequency | 319.5 MHz |
| Alarm volume | 85 dBA @ 10 ft (3 m) minimum |
| Power | 2 × AAA alkaline batteries |
| Operating temperature | 0°C to 40°C |
| Dimensions | 12.0 × 10.4 × 4.1 cm (4.7 × 4.1 × 1.6 in) |
| Certifications/Listings | UL2034, CSA 6.19-01 |
| Programming (Interlogix) | Recommended Sensor Group: 34 |
Downloads
FAQ
Will the RE115 work with my Interlogix/GE system?
The RE115 is designed for the Interlogix/GE-style 319.5 MHz ecosystem. Confirm your panel’s supported wireless frequency before ordering.
Is this a smoke alarm?
No. This is a carbon monoxide (CO) alarm. CO alarms and smoke alarms detect different hazards, and many homes use both.
How do I enroll the RE115?
Put the panel into wireless enrollment mode, then press and hold the RE115 test button for several seconds to send the enrollment signal.
How often should I test it, and when should I replace it?
Test after installation and weekly thereafter. Replace the CO alarm after approximately 10 years (see “replace by” label).
Note: Always follow the included installation guide and any local requirements. A CO alarm is not a substitute for proper installation and maintenance of fuel-burning appliances and ventilation systems.