Lutron LED Dimmers Canada

Lutron LED Dimmers Canada — Diva LED+, Maestro LED+, Sunnata LED+, Caséta smart LED dimmers, sensor dimmers, and LED fixture-control paths

Lutron LED Dimmers Canada is the focused Lutron LED+ dimmer hub for compatible dimmable LED lighting projects. Use this page when the buyer needs a Lutron dimmer for an LED lighting load and wants to compare Diva LED+, Maestro LED+, Sunnata LED+, Caséta smart LED dimmers, sensor LED dimmers, multi-location kits, dual controls, and LED fixture/pot-light pairing paths.

If the selected fixture, driver, transformer, or lighting system requires electronic low-voltage, magnetic low-voltage, or 0-10V control, use the specialty-load paths instead: Lutron ELV Dimmers, Lutron MLV Dimmers, or Lutron 0-10V Dimmers. For the broader Lutron dimmer family, use Lutron Dimmers Canada.

Verify before ordering: LED dimming depends on the selected fixture or bulb, LED driver, total connected load, wiring condition, neutral requirement, low-end trim needs, single-pole or multi-location plan, smart-home path, sensor behaviour, finish family, and wallplate plan. Confirm the exact product page and manufacturer documentation before treating any LED dimmer, kit, companion device, dual control, or accessory as compatible.

Start here: choose the right Lutron LED dimmer path

Use this table to route LED dimmer intent into the correct Lutron family before comparing finishes, variants, load ratings, wiring requirements, kits, and accessories. This is a decision aid, not a compatibility guarantee.

Buyer need Start here Also compare Why to review it
Diva LED+ paddle-style local dimming Lutron DVCL-153P Diva LED+ Dimmer DVCL-153PH Wallplate Kit · DVSCCL-153P Satin Diva LED+ · Diva & Claro Good starting route when the buyer wants a familiar paddle-style local dimmer for compatible dimmable LED loads.
Higher-capacity LED+ Diva path Lutron DVCL-253P Diva LED+ High-Capacity Dimmer DVCL-253PH Retail Pack · DVSCCL-253P Satin Path · Lutron LED Dimmers Review when the connected LED lighting load or project layout points beyond the basic LED+ dimmer path. Confirm load calculations before ordering.
Diva LED+ with locator / night-mode path Lutron DVCLN-153P Diva LED+ Dimmer with Locator Light DVCL-153P · DVCL-153PH · Lutron Wallplates Use when the buyer wants a Diva LED+ local dimmer with locator/night-mode style features after confirming the exact model.
Maestro LED+ tap-style dimming Lutron MACL-153M Maestro LED+ Digital Dimmer MACL-153MH Retail Pack · MACL-153M Retail Box · Lutron Maestro Use when the buyer prefers Maestro-style tap control, digital dimming behaviour, or Maestro family consistency.
Maestro LED+ multi-location kit path Lutron MACL-153MRHW Maestro LED+ Dimmer Kit Lutron Companions · Lutron Wallplates · Lutron Maestro Review when the project needs an LED+ dimmer kit or supported multi-location planning rather than a single standalone wall dimmer.
Sunnata LED+ touch-style dimming Lutron STCL-153M Sunnata LED+ Dimmer STCL-153MH Retail Path · STCL-153MR 3-Way Kit · STCL-153MRH Kit Use when the project calls for Sunnata styling, touch-style control, and an LED+ load path verified against the selected model.
Caséta smart LED dimming Lutron DVRF-6L Caséta Diva Smart Dimmer PD-6WCL Caséta Smart Dimmer · Lutron Caséta · Lutron Smart Hubs Use when the LED dimming project needs app-supported control, scenes, schedules, Pico remote paths, or a Caséta-compatible smart-control route.
LED+ sensor dimming Lutron MSCL-OP153M Maestro LED+ Motion Sensor Dimmer MSCL-VP153M Vacancy Sensor Dimmer · MSCL-OP153MH Retail Kit · Lighting Sensors Use when the buyer needs brightness control and sensing logic together, not just a sensor switch or standard dimmer.
Dual-control LED+ switch / timer / fan paths Lutron MACL-L3S25 Maestro Dual Control LED+ Dimmer and Switch MACL-L3T251 Dimmer + Timer · MACL-LFQ Dimmer + Fan Control · Lutron Fan Controls Review when one wallbox location needs combined dimming plus another control function. Confirm the exact load and wiring path before ordering.
Fixture or driver requires specialty dimming Lutron ELV Dimmers Lutron MLV Dimmers · Lutron 0-10V Dimmers · LED Drivers Leave the LED+ path when the fixture, transformer, driver, or project documentation requires ELV, MLV, 0-10V, or another specialty control method.

Important product-type boundary

This collection is built around Lutron LED dimmer intent. It can include primary LED+ dimmers, smart LED dimmers, sensor LED dimmers, dual controls, multi-location kits, wallplate kits, and accessory/companion paths. Check the product type before ordering so you do not substitute a kit, accessory switch, dual-control device, wallplate bundle, or companion device for a primary wall dimmer.

This collection is not the main path for ELV, MLV, or 0-10V projects. If the selected fixture or driver requires one of those methods, use the specialty Lutron dimmer collection before choosing a control.

Shop Lutron LED dimmers by type

Choose by LED lighting project

When this is not the right dimmer collection

  • Use Lutron ELV Dimmers when the fixture or driver requires electronic low-voltage, reverse-phase, or phase-selectable dimming.
  • Use Lutron MLV Dimmers when the transformer/load path requires magnetic low-voltage dimming.
  • Use Lutron 0-10V Dimmers when the selected fixture or driver uses 0-10V control wiring.
  • Use Lutron Fan Controls when the load is a compatible fan rather than a lighting load.
  • Use Lutron Dimmers Canada when the buyer wants all Lutron dimmer types in one place.

What to confirm before ordering Lutron LED dimmers

  • Whether the product is a primary LED dimmer, smart dimmer, sensor dimmer, dual control, multi-location kit, wallplate kit, companion device, or accessory.
  • Fixture or bulb compatibility, LED driver type, total connected load, minimum load, and low-end trim requirements.
  • Wiring condition: neutral availability, single-pole, 3-way/multi-location, companion-device requirements, and wallbox/device space.
  • Smart-control path: Caséta, Pico remote, hub/bridge, app control, scenes, schedules, or non-smart local dimming.
  • Whether the project actually requires ELV, MLV, 0-10V, fan control, or another specialty route instead of standard LED+ dimming.
  • Finish family, wallplate gang count, and whether accessories should be selected with the primary dimmer.

Lutron LED Dimmer FAQ

Where should I start if I need a Lutron dimmer for LED lights?

Start with this Lutron LED Dimmers collection, then narrow by Diva LED+, Maestro LED+, Sunnata LED+, Caséta smart dimming, sensor dimming, or dual-control requirements.

What is the difference between a Lutron LED dimmer and an ELV dimmer?

A Lutron LED dimmer is used for compatible dimmable LED lighting loads. An ELV dimmer is used when the fixture or driver specifically requires electronic low-voltage, reverse-phase, or phase-selectable dimming. Verify the fixture or driver requirement before ordering.

Do all Lutron LED dimmers work without a neutral wire?

No. Neutral requirements depend on the exact model, load type, and dimming method. Verify the selected product documentation before ordering.

Can one Lutron LED dimmer control multiple pot lights?

It depends on the total connected load, fixture/driver compatibility, wiring conditions, and selected dimmer rating. Add the load of all connected fixtures and verify against the exact dimmer model.

Are dual controls the same as standard LED dimmers?

No. Dual controls combine dimming with another function such as switching, timing, or fan control. Confirm the wallbox, wiring, and load requirements before choosing a dual-control device.

Quick category guide

What this category is for
Lutron LED Dimmers Canada — Diva LED+, Maestro LED+, Sunnata LED+, Caséta smart LED dimmers, sensor dimmers, and LED fixture-control paths Lutron LED Dimmers Canada is the f...

Filter products
The highest price is $259.99
$
$
Clear all

41 Products