Comtrend PG-9182PT Single G.hn Wave 2 Powerline Adapter - 2000Mbps Pass-Through
- Brand
- Comtrend
- SKU
- PG-9182PT
- GTIN / UPC
- 897384000906
Shipping, returns & support
- ShippingFree standard shipping in Canada on orders of $350.00 CAD or more. See shipping info.
- Returns 30-day returns. See return policy.
- WarrantyNeed warranty or support details? Start with product support.
- SupportTalk to our Calgary-based team through contact & support.
Quick product facts
- Adds a wired network point where running new Ethernet cable is not practical.
- Pass-through design helps avoid losing use of the wall outlet.
- Clear single-adapter listing helps distinguish it from the PG-9182PT-KIT starter kit.
Product identifiers
- VendorComtrend
- SKUPG-9182PT
- GTIN897384000906
Key specifications
| Component type | Powerline Adapter |
|---|---|
| Power source | AC-powered |
Verify before ordering
- Port count
- PoE standard
- Power budget
- Speed and cabling requirements
Technical fit can depend on site conditions. Contact support if you are replacing an old model or confirming compatibility.
Need help before ordering?
- Confirm compatibility — Ask our Calgary-based team
- Buying in volume or for a project? — Request project pricing
- Replacing an older model? — Send us the existing model number
- Need it fast? — Check shipping timelines
Comtrend PG-9182PT single G.hn Wave 2 powerline adapter
The Comtrend PG-9182PT is a single G.hn Wave 2 powerline adapter with a built-in pass-through electrical outlet. It uses compatible existing electrical wiring to carry network traffic at up to 2000Mbps PHY, then provides a Gigabit Ethernet port where the adapter is plugged in.
Important: this listing is for one single PG-9182PT adapter, not the PG-9182PT-KIT. A minimum of two compatible G.hn powerline adapters is required to create a working link.
Best used for
- Adding a wired network point where Wi-Fi is weak.
- Basements, offices, TV locations, gaming setups, or rooms without Ethernet drops.
- Retrofit networking where running new Ethernet cable is not practical.
- Pairing with another compatible Comtrend G.hn adapter near the router.
Key product details
- Model/SKU: PG-9182PT.
- Product type: single G.hn Wave 2 powerline adapter.
- Network path: compatible electrical wiring.
- Rated powerline speed reference: up to 2000Mbps PHY.
- Ethernet: one Gigabit Ethernet port.
- Pass-through outlet: built-in AC outlet so the wall receptacle is not fully lost.
- Security: AES 128-bit encryption between paired G.hn adapters.
Single adapter vs kit
Choose this PG-9182PT single adapter when you are adding to an existing compatible G.hn powerline network or replacing one side of a link. Choose the PG-9182PT-KIT when you need the two-adapter starter kit for both ends of the link.
Compatibility notes
Powerline performance depends on wiring quality, circuit conditions, distance, and electrical noise. PG-9182PT is a powerline networking adapter; it is not Ethernet-over-coax, not a PoE injector, not a 5V/12V PoE splitter, and not a GRID structured PoE product.
Frequently asked questions
Do I need another adapter?
Yes. At least two compatible G.hn adapters are required to create a working powerline link.
Is this the same as the PG-9182PT-KIT?
No. This listing is for one single PG-9182PT adapter. The kit listing includes the two-adapter kit.
Does this provide PoE?
No. For powerline networking with PoE output, use the PG-9182PoE where the endpoint requirements match the product specifications.
Building a four-location powerline network with PoE?
This product is a single PG-9182PT powerline adapter with a pass-through outlet, not a PoE power source. The four-location G.hn PoE bundle (SS-COM-POE-4LOC) combines one PG-9182PT at the router/switch side with four PG-9182PoE remote adapters. A two-adapter PG-9182PT-KIT is a different product and does not itself supply PoE.
Every powerline network needs at least two compatible adapters. The four-location configuration has five adapters in total and depends on usable electrical wiring at each intended outlet. Each remote PG-9182PoE has a 30 W shared PoE budget across its two Ethernet ports; endpoint devices, cables and installation are separate.