EcoNet Bulldog Battery Backup Module, 3000mAh 12V/5V UPS — 24+ Hour Runtime | BB3K
- Brand
- EcoNet Controls
- SKU
- BB3K
Shipping, returns & support
- ShippingFree standard shipping in Canada on orders of $350.00 CAD or more. See shipping info.
- Returns 30-day returns. See return policy.
- WarrantyNeed warranty or support details? Start with product support.
- SupportTalk to our Calgary-based team through contact & support.
Quick product facts
- ["Keeps your valve robot able to close during a blackout"
- "No tools needed to install"
- "Works with every Bulldog controller generation (Z-Wave
Product identifiers
- VendorEcoNet Controls
- SKUBB3K
Key specifications
| Component type | Smart Water Valve |
|---|
Source documents
Need help before ordering?
- Confirm compatibility — Ask our Calgary-based team
- Buying in volume or for a project? — Request project pricing
- Replacing an older model? — Send us the existing model number
- Need it fast? — Check shipping timelines
TL;DR: The BB3K is a 3000mAh inline battery backup that keeps your EcoNet Bulldog valve robot (EVC200, EVC300, or EVC400) powered for 24+ hours during an outage, so it can still close if a leak is detected. Plug-and-play, no tools. $49 CAD, now $31.85 CAD (35% off).
Power Outage Protection for Your Smart Valve
The EcoNet Controls BB3K Battery Backup is an essential fail-safe add-on for your Bulldog water shutoff system. It acts as an inline uninterruptible power supply (UPS), keeping your valve robot powered and ready to act even if the electricity goes out.
Power outages often strike during severe storms — exactly when the risk of basement flooding or pipe freezing is highest. The BB3K keeps your Bulldog system on guard, providing up to 24 hours of standby power to shut off the water if a leak is detected.
Quick Facts
| Capacity | 3000mAh Lithium-Ion |
| Outputs | 12V DC (primary, for valve) / 5V USB (secondary) |
| Connector | Standard 5.5mm x 2.1mm barrel jack |
| Runtime | 24+ hours standby (varies with valve cycling) |
| Compatible with | EVC200 (Z-Wave), EVC300 (Wi-Fi), EVC400 (Matter) |
| Battery lifespan | Typically 2–4 years, similar to a laptop/phone Li-Ion pack |
The Bulldog Valve Robot plugs into a wall outlet. Without a backup battery, a power outage renders the motor dead — if a pipe bursts during a blackout, the valve can't close. The BB3K bridges that gap.
Key Features
- Automatic recharging: installs inline between your wall outlet and the Bulldog valve; charges while power is on, takes over instantly when it's lost.
- 24+ hour runtime: high-capacity 3000mAh Li-Ion cells keep the system in Armed/Standby mode for over a full day.
- Plug-and-play install: no tools required; uses standard barrel connectors compatible with all Bulldog power adapters.
- Universal compatibility: works with EVC200 (Z-Wave), EVC300 (Wi-Fi), and EVC400 (Matter) robots.
Installation
- Unplug the AC power adapter from your Bulldog Valve Robot.
- Plug the AC adapter into the input port of the BB3K.
- Plug the BB3K's output cable into the Bulldog Valve Robot.
- Confirm the LED indicator shows charging/active.
Frequently Asked Questions
Will this keep my Wi-Fi running?
No. It powers the valve robot so it can mechanically close the pipe — it does not power your router. Bulldog-JW (Wi-Fi) and Matter units with 433MHz ELS100 sensors will still trigger a local shutoff during an outage, even without internet.
How long does the battery last per charge?
Approximately 24 hours of standby; actual runtime depends on how many times the valve opens/closes during the outage.
Does it need to be replaced eventually?
Like any rechargeable Li-Ion battery, expect a 2–4 year lifespan depending on use.
Product Identifiers
SKU / MPN: BB3K | Brand: EcoNet Controls | Category: Home & Garden > Flood, Fire & Gas Safety > Water & Flood Detectors